|Rec. Generator Size||
15kW (full output)
|Open Circuit Voltage||
208-480 VAC +/- 10%
|Number of Phases||
|Rated Duty Cycle||
100% @ 40 A
19 A @ 480 V 1 ph / 11 A @ 480 V 3 ph
|Input Power Cable and Plug||
9 ft single phase 8 AWG 3/C with NEMA 6-50P Plug
|Work Lead with Ground Clamp||
20 ft #8 work cable with 50 mm connection
|Operating Temp Range||
32° F – 122° F
90-125 psi (6.2-8.6 bar)
|Air Flow Requirements||
Up to 3/4"
|Torch Duty Cycle||
100% at 60 A @ 400 cfh air flow
|Torch Air Pressure||
75 psi (5.2 bar)
SL100 Mechanized 1Torch
|Thickness & Rec. Cutting Speed||
1-1/2": < 4 in/min
21.12" L x 7.85" W x 14.15" H
Thermal Dynamics Cutmaster® 60i Plasma Cutter
The Cutmaster® 60i with SL60QD™ 1Torch® is the perfect combination of end-user insight, advanced technology, and intelligent design. Packed with power and offering the highest power-to-weight ratio in its class, the Cutmaster 60i with SL60QD 1Torch also has best in class cutting arc length and the most empowering and engaging user experience no matter the application.
- 7.6 kW rated output, 50% Duty Cycle at 60A with automatic multi-voltage detection from 208-480V; built for portability and durability with the integral multi-handle design.
- SL60QD 1Torch quick disconnect with ATC® (Advanced Torch Connector) allowing selective replacement of either the torch handle assembly or the torch leads, using the patented SureLok® technology also available as an RPT Torch.
- 5/8 in. (16 mm) recommended cut capacity with greater than 1-1/2 in. (38 mm) maximum sever and 5/8 in. (16 mm) pierce.
- High-visibility, over-sized display with gas optimizer technology and consumables end-of-life indicator.