Recommended Capacity | Cutting 1-1/4": 10 ipm |
---|---|
Severance Capacity | Hand Cutting 1-1/2": 5 ipm |
Pierce Capacity | 3/4" |
Metal Removal Rate Gouging | 19.5 lbs per hour |
Groove Profile | 0.23" D x 0.28" W |
Input Voltage | 200 – 480 V |
Kilowatt Output | 12.2 kW |
Input Current @ 12.2 kW | 200/208/240/480 V |
Output Current | 25 – 85 A |
Rated Output Voltage | 143 VDC |
Duty Cycle @ 104° F | 100% @ 66 A |
Open Circuit Voltage | 305 VDC |
Gas Supply | Clean |
Rec. Gas Inlet Flow Rate | Cutting: 400 scfh |
Cable Length | 10 ft |
Power Supply Type | Inverter – IGBT |
Engine Drive Requirements | 20 kW for full 85 A output |
Certifications | CSA-certified for use in the Americas and Asia |
Dimensions | 19.7" D x 9.2" W x 17.9" H (including handles) |
Weight | 71 lbs (with 25' torch) |
Hypertherm® Powermax85® Plasma Cutter
Item #
POWERMAX85
Category Plasma Cutters
- Finish jobs faster with cut speeds two and a half times greater than oxyfuel on 12 mm (1/2”) mild steel
- Superior cut and gouge quality let you spend less time on grinding and edge preparation
- Multiple, easy-to-use torch styles let you tackle a wide variety of jobs using the same system
- No need to change the air pressure – Smart Sense™ technology ensures that it is always correctly set
- SpringStart™ technology ensures consistent starting and a more reliable torch
- Drag cut at full output with a patented shield that reduces dross buildup for smoother cutting
- Hypertherm Certified™ reliability ensures peak performance even in the harshest environments
- Duramax™ torches are designed for high-impact and heat resistance
Related products
-
Plasma Cutters
Hypertherm® Powermax125® Plasma Cutter
-
Plasma Cutters
Hypertherm® Powermax30® AIR Plasma Cutter
-
Plasma Cutters
Thermal Dynamics Cutmaster® 60i Plasma Cutter